Line-up for Meetkoppel'19

other: Meetkoppel - Welcome

Saturday January 26
09:45-10:00, binnentuin

demonstration: Tammo ter Hark - Meet je Stad platform

The community consists of people. People that meet and do great things. Supporting the community we developed Hypha, a CMS that support developing community websites.

During the presentation Tammo will tell about the people and the process behind Hypha. Also about what this Open Source CMS can do for other groups.

Also see: http://meetjestad.net
Sunday January 27
14:45-15:30, spullenlab

other: Diana Wildschut - LoRa Bat Detector

Brainstorm on how we can make a LoRa Bat Detector. Together we search the net and figure out what sensors to use, how and where to analyse the data in order to make it suitable for LoRa.
We make a plan to build one and how to continue from there.
Sunday January 27
15:30-16:15, fablab

lecture: Ton Zijlstra - Use open data for your own projects

There are mountains of useful data available from government that you can use for your own projects. Concerning maps, environment, mobility, spending, energy usage, and many other things. Open data can be a source of agency for citizens, organisations, companies, and even other government branches. For citizen science projects they may provide context for your own measurement for instance.

We'll discuss what open data is, what is available, and how you might use open data. And we'll explore with participants what data might be of interest to you, and if /from where such data might be available, or if not, how to request it.
Sunday January 27
15:30-16:15, spullenlab

lecture: Thomas Telkamp/Lacuna Space - Low-barrier satellite IoT access

Lacuna Space will launch satellites to receive data from IoT sensors in remote areas all around the world. The interface will be open-source, such that people can build their own devices to connect to the satellite service. This could enable citizen science projects in places where this has not been viable before. We will talk about our journey to get there, and brainstorm on the use-cases this might make feasible.
Sunday January 27
14:00-14:45, spullenlab

lecture: Harmen Zijp - Method to madness

Spontaneous sensor experiments are facilitated by generic tools but hindered by too much of a preconceived format. However, too much variety in all kinds of measurements stands in the way of exchanging and aggregating data in a meaningful way. We propose a protocol to make the ends of small scale experimenting and large scale data analysis meet.
Saturday January 26
16:15-17:00, spullenlab

workshop: Iris Douma - childrens' activities

There will be several activities for children, both on Saturday and on Sunday. So you can just bring them along!

lecture: Jeroen van der Sluijs - Citizen science and pollinator decline

Professor Jeroen van der Sluijs is an expert on pollinator decline and the dangers of neonicotinide pesticides. He gives an overview of the complex problems and where he sees chances for citizen scientists to contribute to the solution of this very urgent problem.
Saturday January 26
14:45-15:30, spullenlab

lecture: Robert Mureau - Using Meet je Stad measurements for scientific publications

In the Meet je Stad project, measurements are being made throughout the city, of a.o temperature and relative humidity.
Every day a total of between 80 and 140 sensors are active.
Measuring is just the beginning, the importance is in what we measure.
The Meet je Stad measurements allow us to research the climate in the city of Amersfoort.
In this presentation we show an analysis of the data of the record hottest night of this summer, and the problems you run into when you try to filter the data for outliers.
Sunday January 27
16:15-17:00, spullenlab

other: Paul Brouwer - Meet-je-sloot / measure-your-ditch brainstorm

With LORA infrastructures, such as the one of 'meet je stad' we can start measuring all kinds of things about our environment. In this brainstorm I would like to know what things you would like to measure about water? What would you like to know about your local ditch, lake, moat, river, sea, garden pond, you name it. What is already out there in terms of low-costs sensors and what is still missing? Can we design good-enough sensors ourselves?
Sunday January 27
10:45-11:30, spullenlab

lecture: Andries Lohmeijer - Alternative (weather) Sensing Methods

The MJS nodes are designed to be build simply, reliable and energy efficient. I will present some design idea's that might work but did not manage to verify.
Sunday January 27
11:30-12:15, spullenlab

demonstration: Andries Lohmeijer - Work without progress

See the title!
Sunday January 27
16:15-16:45, fablab

lecture: Lisette Klok - Measuring hot cities

Measuring water temperatures, air temperatures, solar radiation and other meteorological data in cities help to understand the urban climate and the urban heat island effect. In this presentation, I will present four measurement experiments carried out in Amsterdam, which give answers to the following questions: What are the thermal conditions during extreme warm days in the city of Amsterdam? Which urban areas are coolest? How large is the urban heat island effect during day and night? How hot can bedrooms become during a heat wave if you keep your window closed? Does urban water cool the urban environment?
Saturday January 26
12:15-13:00, spullenlab

lecture: Frans Kets - Air Quality in Leidschendam Voorburg - preliminary results of analysis

Citizens in Leidschendam Voorburg joined a Citizen Science initiative of the Provincie Zuid Holland and have been measuring NO2 and PM10 pollution since May 2018. Analysis methods have been developed. Preliminary results are interesting, but also lead to questions on the techniques employed.
Saturday January 26
10:45-11:30, spullenlab

demonstration: Egon Kastelijn - Adding water to your DataLake

Citizen Science projects tend to produce a lot of data.
Storing measurements can be quite a challenge if you want to be able to analyze and query your data in a quick and easy way.
The measurement initiative in Zeist (SMAL Zeist) also faced this challenge and wants to demonstrate their design choices, and how that enabled them to produce (real-time) charts, maps and dashboards.
Saturday January 26
15:30-16:15, spullenlab

lecture: Bart van der Wolf - Fireworks in Zeist, preliminary air-quality observations/conclusions

A Citizen Science project, SMAL-Zeist, is trying to make sense of the sensor data collected during New Year's Eve 2018 - 2019. Municipalities in the Netherlands are struggling with policies to limit the public tradition of lighting large quantities of fireworks, and have to navigate between safety issues, nuisance and patronage.
Saturday January 26
10:00-10:45, spullenlab

other: RIVM, Marita of Hester - Gesprek verbinden burgerinitiatieven samen milieu meten

Hoe kunnen initiatieven van burgers die zelf milieu meten (bijvoorbeeld luchtkwaliteit), onderling contact houden, weten van elkaars bestaan, ervaringen uitwisselen etc.
Saturday January 26
10:45-11:30, fablab

lecture: Lukas Mocek - Air quality Sensor network - Citizen Science project Luftdaten.info

A small groups of citizens have been declared crazy in 2015 by their aim to cover the South-German city Stuttgart with 300 DIY air quality sensors. This project has reached now an installation base of over 6000 sensors in over 50 countries worldwide.
Saturday January 26
11:30-12:15, spullenlab

lecture: Manuel Hempel - The bugged bees: Microclimate monitoring in urban beehives

Modern day beehives differ substantially from tree cavities, the habitat that the bees naturally evolved in. This has a large impact on the micro-climate inside the hive, which is important for the bees well-being and impacts the winter survival rates. I am therefore investigating different types of top covers to improve the effects on the inner micro-climate and correlate the results to weather data collected via the Meet je Stad network. The presentation will give a brief overview of urban beekeeping, the performed measurements and the potential use of the Meet je Stad LoRa-network to further improve modern hives.
Saturday January 26
14:00-14:45, spullenlab

demonstration: Nicko straathof / Joost Wesseling - Fijnstoflicht / Particulate Matter Light /Feinstaub Ampel

Demonstration of colorfull visualization of the real-time average PM10 concentration in the air in Amersfoort suited for public display.
Saturday January 26
13:00-17:00, fablab
Sunday January 27
10:00-14:00, fablab

other: Biolab Amersfoort - DiY sensorlab

kickoff for the DiY sensorlab, where people can develop new types of sensors. They can be electronic, biological, mechanical, chemical or whatever else you can think of.
In this kickoff brainstorm we want to share our plans with you and use your brainpower to get the project a step closer to realisation.
Sunday January 27
16:45-17:30, fablab

other: Dobbelmannklooster Nijmegen - Citizen's community rainwater climate adaptation project Nijmegen

36 Citizens in the city of Nijmegen who live in an old monastery build themselves a community green water infiltration and rainwater harvesting system that is disconnected from the sewage system. The amount of rain falling in heavy downpours, will continue to increase. Rainwater flows now into a tank and when the tank is full the water flows into the ground via infiltration crates. A measuring system to measure (heavy)rainfall, infiltration speed, water use and water quality is under development. All data is open source and will be used in an app. Help in this stage is appreciated.
Sunday January 27
12:15-13:00, spullenlab

workshop: Lisette Klok, Sandra Sijbrandij en Diana Wildschut - oh no, we have to cooperate?

In the citizen science project Meet je Stad, a group of citizens, a local government and a university of applied sciences work together. How do these worlds communicate? Is the cooperation always without trouble? What works and what does not?
Saturday January 26
10:00-10:45, fablab

demonstration: Meet je Stad Amersfoort - The new PCB is here!

Meet je Stad started as a group that measures climate locally. Now, air quality has ben added to the project.
In this lecture/brainstorm Matthijs Kooijman and Harmen Zijp walk you through the new PCB and are eager to hear your comment and ideas.
Sunday January 27
10:00-10:45, spullenlab

lecture: Ger Hanssen - Physical temperature vs. radiant temperature

The meet-je-stad devices measure temperature, but sometimes literature talks about different types of temperature. What is the difference between the pysical temperature and the radiant temperature? Both measure temperature, but which is the real one? This is a quest for the true nature of temperature and how to measure it. The difference between heat and temperature is explained and at least 3 ways of measuring temperature are being explained. This is done in a vivid way with demonstrations to clarify the concepts.
Saturday January 26
11:30-12:15, fablab

demonstration: Show and tell - Sensor salon

Bring your own measuring rig, prototypes and work-in-progress. Present the website of your project, posters, handouts, publications, schematics or policy document. If all else fails, at least bring your back of the envelop sketch signalling the great things that lie ahead.
Saturday January 26
13:00-17:00, fablab
Sunday January 27
10:00-14:00, fablab

other: Linda Carton. Activiteit: Luisteren - Listening to you and others - In vrijheid samenwerken: Hoe kan citizen science leiden tot convergentie van science and citizens?

Ik probeer zoveel mogelijk te luisteren op zaterdag van deze "great gathering of the commons." Om anderen te ontmoeten, hierbij programma-onderdelen waar ik kan deelnemen bij Koppelting, zaterdag 26-1:
- 10:45-11:30, ‘Gesprek verbinden burgerinitiatieven samen milieu meten,’ Hester&Marita,
- 11:30-12:15, ‘Air quality Sensor network - Citizen Science project Luftdaten.info,’ Lukas Mocek,
- 14:45-15:30, 'Citizen science and pollinator decline,' Jeroen v/der Sluijs,
- 15:30-16:15, 'Adding water to your DataLake,' Egon Kastelijn,
- 16:15-17:00, 'Method to madness,' Harmen Zijp.
Voorbeeld vraag waarover ik graag van-gedachten-wissel of bijpraat: Hoe kan citizen science leiden tot convergentie van science and citizens?
Tot zaterdag! ‘k Zie ernaar uit.

other: Jan van 't Klooster - Grondwater, verdroging, ecologie

Wat is de invloed van droge zomers op de groenvoorziening/ecologie
Saturday January 26
13:00-17:00, fablab

workshop: Karen Wins - Meet je Stad & Education

In order to reach young people for our Meet je Stad project, schools ar an important entry. What did we do the last 3 years in schools in Amersfoort and what are problems we ran into? Together with you we could figure out better ways of colaboration with youngsters and schools.
Saturday January 26
12:15-13:00, fablab

demonstration: Erik Broer - Bat knowledge carrier

Bats. Nocturnal animals, mysterious creatures, a bit eerie to most but very useful for all.
They swiftly fly around the light post, sometimes even approaching you to check you out.
You can sometimes see them at dusk, but when darkness hits they are gone.
At least… for the naked eye. But what about our ears?!

I`d like to share what I know about bats, their behaviours and most of all how they use ultrasonic sound to navigate.
Sunday January 27
14:45-15:30, fablab

workshop: Doezo - Workshops voor kinderen in de Doezo ontdekbus

De Doezo ontdekbus staat op zaterdag en zondag op het terrein van Meetkoppel. Het is een kleine wereld waar alles draait om duurzaamheid, techniek en innovatie. De bus heeft 40 proefjes en leuke activiteiten op het gebied van techniek en duurzaamheid en is geschikt voor kinderen van 6-13 jaar.
Saturday January 26
14:00-15:00, binnentuin
Sunday January 27
14:00-15:00, binnentuin

other: Meetkoppel - Breakfast

We start the day with a nice breakfast in good company.
Saturday January 26
09:00-09:45, binnentuin
Sunday January 27
09:00-10:00, binnentuin

other: Lunch - Lunch

Saturday January 26
13:00-14:00, binnentuin
Sunday January 27
13:00-14:00, binnentuin

other: Drinks - Drinks

Saturday January 26
17:00-18:00, binnentuin
Sunday January 27
17:00-18:00, binnentuin